Kiosk Monthly Maintenance Checklist

Proper kiosk and 3D printer maintenance is essential for keeping your machine running and performing at its most optimal level. It is highly recommended to complete this checklist every month. See below to find out what's required and why.

Deep Clean the Build Plate

Remove any large pieces of plastic by hand/with the scraper.

Pour 90% or 99.9% isopropyl alcohol on to a paper towel.

Wipe/Scrub the plate until clean.

Why this is important?

Allows object to properly stick to the bed by removing any dust, debris and residue from the build plate.




Clean the Cabinet

Remove large pieces of plastic and throw away.

Vacuum up the smaller debris (from fan and gear cleaning)

Use a microfiber cloth to dust all the inside and outside walls of the cabinet.

Use a wet (water) microfiber cloth to wipe off the front window.

>> Do NOT use any cleaning solutions on the window to keep it crystal clear.

Why this is important?

Prevents plastic getting stuck in the belts/other parts of the printer.

Keeps your kiosk looking brand-spanking new.

Updated on: 11/11/2024