Printing with Copoly (CPX)

• Copoly Plate Maintenance

  Copoly Plate Maintenance The Copoly plate will need to be cleaned to help ensure that filament is properly laid down and is secured on the surface. Here is what a new vs clean vs dirty Copoly plate will look like: Brand new plate Dirty plateFew readers

• Printing with CPX

  Printing with CPX This page describes the general workflow when working with Copoly filament such as CPX. Click on any of the linked pages to get detailed step-by-step guide. Prep Copoly Plate with BuildTak Bond Check that two silver tabs of the Copoly plate are in the back Apply BuildTakPopular

• Loading Filament

  Loading/Extruding Filament Cut the end of the filament at a steep angle (~45 degrees) above any ridges. 45 degree snip Example Thread the filament through the guide tube towards the top of the tool head. Insert the spool onto the filament holder so the cut end goes towards the back of the cabinet. Next threPopular

• Preparing the Guide Tube for the Asteroid Tool Head

  Preparing the Guide Tube for the Asteroid Tool Head Tools & Supplies Needed: Guide Tube 2 black/green stoppers 3 Zip Ties Micro cutters Instructions: Helpful tips before we get started: Turn on the kiosk lights. Remove the filament spool and handle from kiosk. 1.0 Push the stopper towards you so that there is about 10 cm (4 in) from the end. 1.1 Add the second stopper and push so that there is a small gap between the two stoppers. 2.0 Thread a zip tie through the hFew readers